Merge branch 'develop' of https://git.it.hs-heilbronn.de/auribest/smart_garden into mseyfrie_dev

.gitignore

@@ -3,3 +3,4 @@
 .vscode/c_cpp_properties.json
 .vscode/launch.json
 .vscode/ipch
+.vs

platformio.ini

@@ -13,6 +13,7 @@ platform = espressif32
 board = az-delivery-devkit-v4
 framework = arduino
 monitor_speed = 115200
+; build_flags = -DCORE_DEBUG_LEVEL=5
 
 lib_deps =
   439 #ID of Lightsensor library BH1750 
@@ -24,4 +25,4 @@ lib_deps =
   ; MQTT@^2.4.7
   PubSubClient@^2.8
   ArduinoNvs@^2.5
-  ; ESPRandom@^1.3.3
+  ESPRandom@^1.3.3

src/capacitiveSoilMoistureSensor.cpp

@@ -1,8 +1,7 @@
 /*
   Code for the Capacitive Soil Moisture Sensor
 */
-
+#include <common.h>
-#include <header.h>
 
 const int numReadings = 20;
 
@@ -10,24 +9,24 @@ void setupCapacitiveSoilMoistureSensor() {
   // pinMode(PIN_MS, INPUT);
 }
 
-int readCapacitiveSoilMoistureSensor()
+int readCapacitiveSoilMoistureSensor() {
-{
+  int total = 0;  // the running total
-  int total = 0;             // the running total
   // read from the sensor:
-  for (int readIndex = 0; readIndex < numReadings; readIndex++)
+  for (int readIndex = 0; readIndex < numReadings; readIndex++) {
-  {
     total = total + analogRead(PIN_MS);
     delay(2);
   }
   int measurement = total / numReadings;
-  Serial.print("soil moisture raw: ");
-  Serial.println(measurement);
-  // add the reading to the total:
-  //int measurement = analogRead(PIN_MS);
 
-  if (map(measurement, VALUE_AIR, VALUE_WATER, 0, 100) < 0) {
+  int finalRes = map(measurement, VALUE_AIR, VALUE_WATER, 0, 100);
+  Serial.print("current soil moisture: ");
+  Serial.println(finalRes);
+
+  if (finalRes < 0) {
     return 0;
-  } else if (map(measurement, VALUE_AIR, VALUE_WATER, 0, 100) > 100) {
+  } else if (finalRes > 100) {
     return 100;
-  } else {return map(measurement, VALUE_AIR, VALUE_WATER, 0, 100);}
+  } else {
+    return finalRes;
+  }
 }

src/capacitiveSoilMoistureSensor.h

@@ -0,0 +1,2 @@
+void setupCapacitiveSoilMoistureSensor();
+int readCapacitiveSoilMoistureSensor();

src/common.h

@@ -0,0 +1,46 @@
+#include <Arduino.h>
+
+// PUBLISH FREQUENCY (MS)
+#define FREQUENCY 60000
+
+// fix for core panic during wifi initialization
+// #define configMINIMAL_STACK_SIZE 4096
+// #define CONFIG_TIMER_TASK_STACK_SIZE 8192
+
+// BH1750 lightsensor
+#define MIN_LIGHT 0
+#define MAX_LIGHT 54612
+
+// DHT11
+#define PIN_DHT11 14
+
+// MQ-135
+#define PIN_MQ135_A 12
+#define PIN_MQ135_D 13
+
+// MOISTURE SENSOR // A7
+#define PIN_MS 35
+#define VALUE_WATER 1650
+#define VALUE_AIR 3500
+
+// Ventil
+#define PIN_VALVE 32
+#define MAX_VALVE_TIMEOUT 5000
+
+// STATUS LED
+#define PIN_LED_R 2
+#define PIN_LED_G 0
+#define PIN_LED_B 4
+
+// LIGHT LED
+#define LIGHT_LED_PIN_R 27
+#define LIGHT_LED_PIN_G 26
+#define LIGHT_LED_PIN_B 25
+#define MAX_LIGHT_TIMEOUT (FREQUENCY - 5)
+
+// MQTT
+#define MQTT_HOST "mqtt.timovolkmann.de"
+#define MQTT_PORT 1883
+#define MQTT_TOPIC_BASE_SUB "smartgarden/commands"
+#define MQTT_TOPIC_BASE_PUB "smartgarden/updates"
+#define MQTT_PATH_SUB MQTT_TOPIC_BASE_SUB "/#"

src/connections.cpp

@@ -1,20 +1,26 @@
 #include <ArduinoJson.h>
-// #include <MQTT.h>
+#include <AutoConnect.h>
 #include <PubSubClient.h>
-#include <header.h>
+#include <WebServer.h>
+#include <WiFi.h>
+#include <common.h>
+#include <store.h>
+#include <valve.h>
 
 extern "C" {
-#include "freertos/FreeRTOS.h"
+  #include "freertos/FreeRTOS.h"
-#include "freertos/timers.h"
+  #include "freertos/timers.h"
 }
 
-#define MQTT_VALVE_COMMAND MQTT_TOPIC_BASE_SUB "/" MQTT_DEVICE_ID "/valve"
+#include <connections.h>
-#define MQTT_SOIL_PROPERTIES MQTT_TOPIC_BASE_SUB "/" MQTT_DEVICE_ID "/soil"
+
+char MQTT_VALVE_COMMAND[72];
+char MQTT_SOIL_PROPERTIES[72];
+char MQTT_LIGHT_PROPERTIES[72];
+char MQTT_AUTO_PROPERTIES[72];
 
 TimerHandle_t mqttReconnectTimer;
 TimerHandle_t wifiReconnectTimer;
-
-// TimerHandle_t mqttProcessingTimer;
 TaskHandle_t mqttTask;
 
 WebServer Server;
@@ -22,12 +28,10 @@ AutoConnect Portal(Server);
 WiFiClient client;
 
 AutoConnectConfig Config;
-// Config.autoReconnect = true;
-// WiFi.config(Config);
-// MQTTClient mqttClient;
 PubSubClient mqttClient(client);
 
 void connectWiFi() {
+  yield();
   Serial.println("Start WiFi...");
   if (Portal.begin()) {
     digitalWrite(PIN_LED_G, HIGH);
@@ -36,14 +40,15 @@ void connectWiFi() {
 
 void mqttLoop(void *parameter) {
   do {
+    yield();
     mqttClient.loop();
-    delay(50);
+    delay(100);
   } while (mqttClient.connected());
   Serial.println("Disconnected from MQTT.");
   if (!mqttClient.connected()) {
     Serial.println("Checking WiFi Connection.");
     if (WiFi.isConnected()) {
-      Serial.println("Starting reconnect timer for MQTT.");
+      Serial.println("WiFi OK. Starting reconnect timer for MQTT.");
       xTimerStart(mqttReconnectTimer, 0);
     }
   }
@@ -51,10 +56,13 @@ void mqttLoop(void *parameter) {
 }
 
 void connectMQTT() {
+  yield();
+  if (mqttClient.connected()) return;
   Serial.println("Connecting to MQTT...");
   // mqttClient.begin(MQTT_HOST, MQTT_PORT, client);
   mqttClient.setServer(MQTT_HOST, MQTT_PORT);
-  mqttClient.connect(MQTT_DEVICE_ID);
+  mqttClient.disconnect();
+  mqttClient.connect(getDeviceIDcharArr());
   if (mqttClient.connected()) {
     Serial.println("Connected!");
   } else {
@@ -63,17 +71,17 @@ void connectMQTT() {
   mqttClient.subscribe(MQTT_PATH_SUB);
   Serial.print("subscribed to: ");
   Serial.println(MQTT_PATH_SUB);
-  xTaskCreate(
+  xTaskCreatePinnedToCore(
-      mqttLoop,   /* Task function. */
+      mqttLoop,
-      "mqttLoop", /* String with name of task. */
+      "mqttLoop",
-      8192,       /* Stack size in bytes. */
+      8192,
-      NULL,       /* Parameter passed as input of the task */
+      NULL,
-      1,          /* Priority of the task. */
+      2,
-      &mqttTask); /* Task handle. */
+      &mqttTask,
-  //xTimerStart(mqttProcessingTimer, 0);
+      1);
 }
 
-void WiFiEvent(WiFiEvent_t event) {
+void WiFiEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
   Serial.printf("[WiFi-event] event: %d\n", event);
   switch (event) {
     case SYSTEM_EVENT_STA_GOT_IP:
@@ -84,14 +92,18 @@ void WiFiEvent(WiFiEvent_t event) {
       break;
     case SYSTEM_EVENT_STA_DISCONNECTED:
       digitalWrite(PIN_LED_G, LOW);
+      // workaround for 202 auth failed bug: https://github.com/espressif/arduino-esp32/issues/2501
+      if (info.disconnected.reason == 202) {
+        Serial.println("weirdbehaviour");
+        Serial.println(info.disconnected.reason);
+        ESP.restart();
+      }
       xTimerStop(mqttReconnectTimer, 0);  // ensure we don't reconnect to MQTT while reconnecting to Wi-Fi
-      // xTimerStop(mqttProcessingTimer, 0);
       xTimerStart(wifiReconnectTimer, 0);
       break;
   }
 }
 
-// void onMqttMessage(MQTTClient *client, char topic[], char payload[], int payload_length) {
 void onMqttMessage(char *topic, byte *payload, unsigned int payload_length) {
   Serial.print("Message arrived [");
   Serial.print(topic);
@@ -101,17 +113,27 @@ void onMqttMessage(char *topic, byte *payload, unsigned int payload_length) {
   }
   Serial.println();
 
+  if (strcmp(topic, MQTT_LIGHT_PROPERTIES) == 0) {
+    Serial.println("receiving light treshold...");
+    Serial.println(topic);
+    StaticJsonDocument<1024> doc;
+    DeserializationError err = deserializeJson(doc, payload);
+    if (err == DeserializationError::Ok) {
+      int nm = doc["nm"];
+      int minLX = doc["minLX"];
+      setLightProperties(nm, minLX);
+    } else {
+      Serial.println(err.c_str());
+    }
+  }
   if (strcmp(topic, MQTT_VALVE_COMMAND) == 0) {
     Serial.println("toggling valve...");
     Serial.println(topic);
-    toggleValve();
+    toggleValve(false);
   }
   if (strcmp(topic, MQTT_SOIL_PROPERTIES) == 0) {
     Serial.println("receiving soil thresholds...");
     Serial.println(topic);
-    //Serial.println(reinterpret_cast<const char *>(payload));
-    // Serial.println(payload);
-    // const int capacity = JSON_OBJECT_SIZE(3) + 2 * JSON_OBJECT_SIZE(1);
     StaticJsonDocument<1024> doc;
     DeserializationError err = deserializeJson(doc, payload);
     if (err == DeserializationError::Ok) {
@@ -123,28 +145,75 @@ void onMqttMessage(char *topic, byte *payload, unsigned int payload_length) {
       Serial.println(err.c_str());
     }
   }
+  if (strcmp(topic, MQTT_AUTO_PROPERTIES) == 0) {
+    Serial.println("receiving auto settings...");
+    Serial.println(topic);
+    StaticJsonDocument<1024> doc;
+    DeserializationError err = deserializeJson(doc, payload);
+    if (err == DeserializationError::Ok) {
+      bool ir = doc["irrigation"];
+      bool li = doc["light"];
+      setAutoProperties(li, ir);
+    } else {
+      Serial.println(err.c_str());
+    }
+  }
+}
+
+void constructMQTTpaths() {
+  strcpy(MQTT_VALVE_COMMAND, MQTT_TOPIC_BASE_SUB "/");
+  strcat(MQTT_VALVE_COMMAND, getDeviceIDcharArr());
+  strcat(MQTT_VALVE_COMMAND, "/valve");
+
+  strcpy(MQTT_SOIL_PROPERTIES, MQTT_TOPIC_BASE_SUB "/");
+  strcat(MQTT_SOIL_PROPERTIES, getDeviceIDcharArr());
+  strcat(MQTT_SOIL_PROPERTIES, "/soil");
+
+  strcpy(MQTT_LIGHT_PROPERTIES, MQTT_TOPIC_BASE_SUB "/");
+  strcat(MQTT_LIGHT_PROPERTIES, getDeviceIDcharArr());
+  strcat(MQTT_LIGHT_PROPERTIES, "/light");
+
+  strcpy(MQTT_AUTO_PROPERTIES, MQTT_TOPIC_BASE_SUB "/");
+  strcat(MQTT_AUTO_PROPERTIES, getDeviceIDcharArr());
+  strcat(MQTT_AUTO_PROPERTIES, "/automatic");
+
+  Serial.println("MQTT_COMMANDS:");
+  Serial.println(MQTT_VALVE_COMMAND);
+  Serial.println(MQTT_SOIL_PROPERTIES);
+  Serial.println(MQTT_LIGHT_PROPERTIES);
+  Serial.println(MQTT_AUTO_PROPERTIES);
 }
 
 void setupConnections() {
+  constructMQTTpaths();
   Serial.println();
   Serial.println();
+  disableCore0WDT();
+  // disableCore1WDT();
+  Config.autoReconnect = true;
+  // Config.autoReset = true;
+  Portal.config(Config);
 
   mqttReconnectTimer = xTimerCreate(
       "mqttTimer", pdMS_TO_TICKS(2000), pdFALSE, (void *)0, reinterpret_cast<TimerCallbackFunction_t>(connectMQTT));
   wifiReconnectTimer = xTimerCreate(
       "wifiTimer", pdMS_TO_TICKS(2000), pdFALSE, (void *)0, reinterpret_cast<TimerCallbackFunction_t>(connectWiFi));
-  // mqttProcessingTimer = xTimerCreate(
-  //   "messageTimer", pdMS_TO_TICKS(50), pdTRUE, (void *)0, reinterpret_cast<TimerCallbackFunction_t>(mqttLoop));
   
   WiFi.onEvent(WiFiEvent);
 
-  // mqttClient.onMessageAdvanced(onMqttMessage);
+  connectWiFi();
+  connectMQTT();
+
   mqttClient.setCallback(onMqttMessage);
 
-  connectWiFi();
 }
 
 void publishMessage(const char *topic, const char *msg) {
-  mqttClient.publish(topic, msg);
+  if(mqttClient.connected()) {
-  // mqttClient.publish(topic, msg, true, 1);
+    mqttClient.publish(topic, msg);
+    Serial.print(topic);
+    Serial.println(" successfully sent.");
+  } else {
+    Serial.println("couldn't send message. waiting for reconnect.");
+  }
 }

src/connections.h

@@ -0,0 +1,5 @@
+void connectWiFi();
+void mqttLoop(void *parameter);
+void connectMQTT();
+void setupConnections();
+void publishMessage(const char *topic, const char *msg);

src/header.h

@@ -1,78 +0,0 @@
-/*
-  Header file for the SmartGarden project
-*/
-
-#define HEADER_H
-
-#include <Arduino.h>
-#include <Wire.h>
-#include <SPI.h>
-#include <BH1750.h>
-#include <Adafruit_Sensor.h>
-#include <DHT.h>
-#include <DHT_U.h>
-
-#include <WiFi.h>
-#include <WebServer.h> 
-#include <AutoConnect.h>
-
-// fix for core panic during wifi initialization
-// #define configMINIMAL_STACK_SIZE 2048
-// #define CONFIG_TIMER_TASK_STACK_SIZE 8192
-
-// DHT11
-#define PIN_DHT11 14
-
-// MQ-135
-#define PIN_MQ135_A 12
-#define PIN_MQ135_D 13
-
-// MOISTURE SENSOR // A7
-#define PIN_MS 35  
-#define VALUE_WATER 1650  
-#define VALUE_AIR 3500  
-
-// Ventil
-#define PIN_VALVE 32
-#define MAX_VALVE_TIMEOUT 10000
-
-// LED
-#define PIN_LED_R 2
-#define PIN_LED_G 0
-#define PIN_LED_B 4
-
-// MQTT
-#define MQTT_HOST "mqtt.timovolkmann.de"
-#define MQTT_PORT 1883
-#define MQTT_DEVICE_ID "esp-max"
-#define MQTT_TOPIC_BASE_SUB "smartgarden/commands"
-#define MQTT_TOPIC_BASE_PUB "smartgarden/updates"
-#define MQTT_PATH_PUB MQTT_TOPIC_BASE_PUB "/" MQTT_DEVICE_ID "/"
-#define MQTT_PATH_SUB MQTT_TOPIC_BASE_SUB "/#" 
-// MQTT_DEVICE_ID "/#"
-
-// PUBLISH FREQUENCY (MS)
-#define FREQUENCY 3000
-
-// moisture
-extern void setupCapacitiveSoilMoistureSensor();
-extern int readCapacitiveSoilMoistureSensor();
-
-// light
-extern void setupLightSensor();
-extern float readLightSensorValue();
-
-// temperature & humidity
-extern void setupTemperatureSensor();
-extern float readHumidity();
-extern float readTemperature();
-
-// mqtt & wifi
-extern void setupConnections();
-extern void publishMessage(const char *topic, const char *msg);
-
-// sensors
-void readSensors();
-void toggleValve();
-void setSoilProperties(int FC, int PWP, int SAT);
-void setupStore();

src/lightChecker.cpp

@@ -0,0 +1,103 @@
+#include <common.h>
+#include <lightChecker.h>
+
+// Bool to check if light is already active
+bool lightActive = false;
+// Colors in Array: purple, blue, green, yellow, orange, red, white
+int colorValueArray[][3] = {{125,0,125}, {0,0,255}, {0,255,0}, {255,255,0}, {255,140,0}, {255,0,0}, {255,255,255}};
+// Pointer for color array
+int colorCounter = 6;
+
+// Setting PWM properties
+const int freq =     5000;
+const int ledChannelRed =   0;
+const int ledChannelGreen = 1;
+const int ledChannelBlue=   2;
+const int resolution =   8;
+
+// Setup method for PWM configurations
+void setupPWM() {
+    // Set pins as output
+    pinMode(LIGHT_LED_PIN_R, OUTPUT);
+    pinMode(LIGHT_LED_PIN_G, OUTPUT);
+    pinMode(LIGHT_LED_PIN_B, OUTPUT);
+
+    // Configure LED PWM functionalitites
+    ledcSetup(ledChannelRed, freq, resolution);
+    ledcSetup(ledChannelGreen, freq, resolution);
+    ledcSetup(ledChannelBlue, freq, resolution);
+
+    // Attach the channel to the GPIO2 to be controlled
+    ledcAttachPin(LIGHT_LED_PIN_R, ledChannelRed);
+    ledcAttachPin(LIGHT_LED_PIN_G, ledChannelGreen);
+    ledcAttachPin(LIGHT_LED_PIN_B, ledChannelBlue);
+}
+
+// Takes a int value representing nanometers and sets color array pointer to appropriate color
+void setValueNM(int NM) {
+    getColorBasedOnValueNM(NM);
+}
+
+// Logic to set color array pointer
+void getColorBasedOnValueNM(int valueNM) {
+    if (valueNM <= 420) {       // Purple
+        colorCounter = 0;
+    }
+    else if (valueNM <= 490) {  // Blue
+        colorCounter = 1;
+    }
+    else if (valueNM <= 575) {  // Green
+        colorCounter = 2;
+    }
+    else if (valueNM <= 585) {  // Yellow
+        colorCounter = 3;
+    }
+    else if (valueNM <= 650) {  // Orange
+        colorCounter = 4;
+    }
+    else if (valueNM > 650) {   // 650 to 750 is Red
+        colorCounter = 5;
+    }
+    Serial.println("New color set based on: ");
+    Serial.print(valueNM);
+}
+
+// Shuts down the light
+bool shutdownLight() {
+    ledcWrite(ledChannelRed, 0);
+    ledcWrite(ledChannelGreen, 0);
+    ledcWrite(ledChannelBlue, 0);
+    return false;
+}
+
+// Activates the light based on colorValueArray
+bool activateLight() {
+    ledcWrite(ledChannelRed, colorValueArray[colorCounter][0]);
+    ledcWrite(ledChannelGreen, colorValueArray[colorCounter][1]);
+    ledcWrite(ledChannelBlue, colorValueArray[colorCounter][2]);
+    return true;
+}
+
+// Activate light for given amount of time if not already activated
+void lightTask(void *parameter) {
+    unsigned long lightTimeoutTimer = millis();
+    if (lightActive == false) {
+        lightActive = activateLight();
+        // If current time is below or equal to light timeout do nothing
+        while (millis() - lightTimeoutTimer <= MAX_LIGHT_TIMEOUT) {
+        }
+        lightActive = shutdownLight();
+    }
+    vTaskDelete(NULL);
+}
+
+// Trigger for lightTask
+void triggerLight() {
+  xTaskCreate(
+      lightTask,   /* Task function. */
+      "lightTask", /* String with name of task. */
+      2048,        /* Stack size in bytes. */
+      NULL,        /* Parameter passed as input of the task */
+      1,           /* Priority of the task. */
+      NULL);       /* Task handle. */
+}

src/lightChecker.h

@@ -0,0 +1,4 @@
+void setupPWM();
+void setValueNM(int NM);
+void triggerLight();
+void getColorBasedOnValueNM(int valueNM);

src/lightSensor.cpp

@@ -1,14 +1,20 @@
-#include <header.h>
+#include <Adafruit_Sensor.h>
+#include <BH1750.h>
+#include <Wire.h>
+#include <lightSensor.h>
 
+// New BH1750 class
 BH1750 lightMeter;
 
+// Setup for reading light sensor (prepares i2c communication)
 void setupLightSensor() {
   Wire.begin();
   lightMeter.begin();
   Serial.println("Sensor started...");
 }
 
+// Method to read and return the light value measured by BH1750 sensor
 float readLightSensorValue() {
-  float intensity = lightMeter.readLightLevel();
+  int intensity = lightMeter.readLightLevel();
   return intensity;
 }

src/lightSensor.h

@@ -0,0 +1,2 @@
+void setupLightSensor();
+float readLightSensorValue();

src/main.cpp

@@ -2,9 +2,13 @@
   Main file for the SmartGarden project
 */
 
-#include <header.h>
+#include <common.h>
+#include <sensors.h>
+#include <store.h>
+#include <connections.h>
 
-#include <string>
+#define TIME_TO_SLEEP 30
+volatile int noSleepTasks = 0;
 
 unsigned long sensorReadTimer = 0;
 bool valveOpen = false;
@@ -20,23 +24,22 @@ void setup() {
 
   digitalWrite(PIN_VALVE, LOW);
 
+  
   setupStore();
+  setupSensors();
   setupConnections();
-  setupLightSensor();
+  // esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * 1000000);
-  setupTemperatureSensor();
-  setupCapacitiveSoilMoistureSensor();
   Serial.println("Setup complete...");
   Serial.println();
   Serial.println();
+  // First read without delay
+  readSensors();
 }
 
 void loop() {
-  // read sensors
+  // Main loop: read sensors
   if (millis() - sensorReadTimer >= FREQUENCY) {
     readSensors();
     sensorReadTimer = millis();
   }
-  // toggle valve
-  if (valveOpen) {
-  }
 }

src/ntpManager.cpp

@@ -0,0 +1,51 @@
+#include <common.h>
+#include <WiFi.h>
+#include <ntpManager.h>
+
+// Url to ntp server
+const char* ntpServer = "pool.ntp.org";
+// Time offset based on gmt in seconds
+const long gmtOffset_sec = 3600;
+// Offset in seconds for daylight saving time
+const int daylightOffset_sec = 3600;
+
+// Start and end hour of the date
+const int dayStart = 8;
+const int dayEnd = 20;
+// Time info structure comes from time.h
+struct tm timeinfo;
+
+// If wifi is connected configure time of esp32
+void setupNTP() {
+    if (WiFi.isConnected()) {
+      Serial.println("WiFi OK. Getting Timestamp");
+      configTime(gmtOffset_sec, daylightOffset_sec, ntpServer);
+      printTimestamp();
+    }
+}
+
+// Method to check if it is currently day or night
+bool checkForDay() {
+    printTimestamp();
+    if((getCurrentHour() > dayStart) && (getCurrentHour() < dayEnd)) {
+        return true;
+    }
+    else {
+        return false;
+    }
+}
+
+// Method to get current hour in 24 hour format
+int getCurrentHour() {
+  int currentHour = timeinfo.tm_hour;
+  return currentHour;
+}
+
+// Method to print a timestamp
+void printTimestamp() {
+  if(!getLocalTime(&timeinfo)){
+    Serial.println("Failed to obtain time");
+    return;
+  }
+  Serial.println(&timeinfo, "%A, %B %d %Y %H:%M:%S");
+}

src/ntpManager.h

@@ -0,0 +1,4 @@
+void setupNTP();
+bool checkForDay();
+int getCurrentHour();
+void printTimestamp();

src/peripherals.cpp

@@ -1,150 +0,0 @@
-#include <ArduinoJson.h>
-#include <ArduinoNvs.h>
-#include <header.h>
-
-#include <string>
-//using namespace std;
-extern "C" {
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-}
-
-#define MQTT_SENSOR_DATA MQTT_PATH_PUB "data"
-
-char buffer[128];
-
-// Feldkapazität des Bodens in Prozent: Standard ist Humus
-int fieldCapacity = 44;
-// PWP des Bodens in Prozent: Standard ist Humus
-int permanentWiltingPoint = 25;
-// Boden vollständig gesättigt bei (Prozent): Standard ist Humus
-int soilSaturation = 69;
-
-void readSensors() {
-  StaticJsonDocument<128> doc;
-  float lxValue = readLightSensorValue();
-  Serial.print("Light intensity: ");
-  Serial.print(lxValue);
-  Serial.println(" lx");
-  doc["brightness"] = lxValue;
-  //sprintf(buffer, "%f", lxValue);
-  //publishMessage(MQTT_BRIGHTNESS, buffer);
-
-  int mstValue = readCapacitiveSoilMoistureSensor();
-  Serial.print("Soil moisture: ");
-  Serial.println(mstValue);
-  // sprintf(buffer, "%i", mstValue);
-  // publishMessage(MQTT_MOISTURE, buffer);
-  doc["moisture"] = mstValue;
-
-  float humidityValue = readHumidity();
-  Serial.print("Humidity: ");
-  Serial.println(humidityValue);
-  // sprintf(buffer, "%f", humidityValue);
-  // publishMessage(MQTT_HUMIDITY, buffer);
-  doc["humidity"] = humidityValue;
-
-  float temperatureValue = readTemperature();
-  Serial.print("Temperature: ");
-  Serial.println(temperatureValue);
-  // sprintf(buffer, "%f", temperatureValue);
-  // publishMessage(MQTT_TEMPERATURE, buffer);
-  doc["temperature"] = temperatureValue;
-  Serial.print("\n");
-  serializeJson(doc, buffer);
-  publishMessage(MQTT_SENSOR_DATA, buffer);
-}
-
-bool openValve() {
-  digitalWrite(PIN_VALVE, HIGH);
-  digitalWrite(PIN_LED_G, LOW);
-  digitalWrite(PIN_LED_B, HIGH);
-  return true;
-}
-
-bool closeValve() {
-  digitalWrite(PIN_VALVE, LOW);
-  digitalWrite(PIN_LED_G, HIGH);
-  digitalWrite(PIN_LED_B, LOW);
-  return false;
-}
-
-void valveTask(void *parameter) {
-  unsigned long valveTimeoutTimer = millis();
-  bool valveOpen = openValve();
-
-  while (valveOpen) {
-    delay(500);
-    int mstValue = readCapacitiveSoilMoistureSensor();
-
-    if (millis() - valveTimeoutTimer >= MAX_VALVE_TIMEOUT) {
-      valveOpen = closeValve();
-    }
-    // if (mstValue > 80) {
-    //   valveOpen = closeValve();
-    // }
-  }
-  vTaskDelete(NULL);
-}
-
-void toggleValve() {
-  xTaskCreate(
-      valveTask,   /* Task function. */
-      "valveTask", /* String with name of task. */
-      2048,       /* Stack size in bytes. */
-      NULL,        /* Parameter passed as input of the task */
-      1,           /* Priority of the task. */
-      NULL);       /* Task handle. */
-}
-
-void persistSoilProps(int FC, int PWP, int SAT) {
-  Serial.println("persistSoilProps");
-  bool f = NVS.setInt("fieldCapacity", FC);
-  bool p = NVS.setInt("permanentWilt", PWP);
-  bool s = NVS.setInt("soilSaturation", SAT);
-  if (f && p && s) {
-    Serial.println("Soil properties sucessfully stored.");
-    NVS.commit();
-  }
-  else {
-    Serial.println("error occured while trying to persist soil properties");
-  }
-}
-
-void restoreSoilProps() {
-  Serial.println("restoreSoilProps");
-  int fc = NVS.getInt("fieldCapacity");
-  int pwp = NVS.getInt("permanentWilt");
-  int sat = NVS.getInt("soilSaturation");
-  if (fc != 0) {
-    fieldCapacity = fc;
-  }
-  if (pwp != 0) {
-    permanentWiltingPoint = pwp;
-  }
-  if (sat != 0) {
-    soilSaturation = sat;
-  }
-  Serial.print(fieldCapacity);
-  Serial.print(permanentWiltingPoint);
-  Serial.print(soilSaturation);
-}
-
-void setupStore() {
-  NVS.begin("store");
-  restoreSoilProps();
-}
-
-void setSoilProperties(int FC, int PWP, int SAT) {
-  fieldCapacity = FC;
-  permanentWiltingPoint = PWP;
-  soilSaturation = SAT;
-  persistSoilProps(FC, PWP, SAT);
-  Serial.print("new fieldCapacity: ");
-  Serial.println(fieldCapacity);
-  Serial.print("new permanentWiltingPoint: ");
-  Serial.println(permanentWiltingPoint);
-  Serial.print("new soilSaturation: ");
-  Serial.println(soilSaturation);
-}
-

src/sensors.cpp

@@ -0,0 +1,65 @@
+#include <ArduinoJson.h>
+#include <capacitiveSoilMoistureSensor.h>
+#include <connections.h>
+#include <lightChecker.h>
+#include <lightSensor.h>
+#include <ntpManager.h>
+#include <sensors.h>
+#include <valve.h>
+#include <store.h>
+#include <temperatureSensor.h>
+#include <common.h>
+
+char buffer[128];
+char MQTT_SENSOR_DATA_TOPIC[64];
+
+void setupSensors() {
+  setupLightSensor();
+  setupPWM();
+  setupTemperatureSensor();
+  setupCapacitiveSoilMoistureSensor();
+  setupNTP();
+
+  strcpy(MQTT_SENSOR_DATA_TOPIC, MQTT_TOPIC_BASE_PUB "/");
+  strcat(MQTT_SENSOR_DATA_TOPIC, getDeviceIDcharArr());
+  strcat(MQTT_SENSOR_DATA_TOPIC, "/data");
+  Serial.println("MQTT_SENSOR_DATA_TOPIC:");
+  Serial.println(MQTT_SENSOR_DATA_TOPIC);
+}
+
+void readSensors() {
+  Serial.println();
+  StaticJsonDocument<128> doc;
+  float lxValue = readLightSensorValue();
+  Serial.print("Light intensity: ");
+  Serial.print(lxValue);
+  Serial.println(" lx");
+  doc["brightness"] = lxValue;
+  if ((lxValue < minimumLightValueLX) && checkForDay()) {
+    triggerLight();
+  }
+
+  int mstValue = readCapacitiveSoilMoistureSensor();
+  Serial.print("Soil moisture: ");
+  Serial.println(mstValue);
+
+  if (automaticIrrigation) {
+    toggleValve(true);
+  }
+
+  doc["moisture"] = mstValue;
+
+  float humidityValue = readHumidity();
+  Serial.print("Humidity: ");
+  Serial.println(humidityValue);
+
+  doc["humidity"] = humidityValue;
+
+  float temperatureValue = readTemperature();
+  Serial.print("Temperature: ");
+  Serial.println(temperatureValue);
+
+  doc["temperature"] = temperatureValue;
+  serializeJson(doc, buffer);
+  publishMessage(MQTT_SENSOR_DATA_TOPIC, buffer);
+}

src/sensors.h

@@ -0,0 +1,2 @@
+void setupSensors();
+void readSensors();

src/store.cpp

@@ -0,0 +1,171 @@
+#include <ArduinoNvs.h>
+#include <ESPRandom.h>
+#include <common.h>
+#include <lightChecker.h>
+#include <store.h>
+
+// Fieldcapacity of the Ground in Percentage: Standard is Humus
+int fieldCapacity = 44;
+// PWP of the Ground in Percentage: Standard is Humus
+int permanentWiltingPoint = 25;
+// Ground completely saturated by (Percentage): Standard is Humus
+int soilSaturation = 69;
+// Minimum light value before light turns on
+int minimumLightValueLX = 50;
+// Switches for automatic light and irrigation control
+bool automaticLight = true;
+bool automaticIrrigation = true;
+// Make sure device irrigates until fieldcapacity is reached
+bool irrigateUntilFC = false;
+
+void persistSoilProps(int FC, int PWP, int SAT) {
+  Serial.println("persistSoilProps");
+  bool f = NVS.setInt("fieldCapacity", FC);
+  bool p = NVS.setInt("permanentWilt", PWP);
+  bool s = NVS.setInt("soilSaturation", SAT);
+  if (f && p && s) {
+    Serial.println("Soil properties sucessfully stored.");
+    NVS.commit();
+  }
+  else {
+    Serial.println("error occured while trying to persist soil properties");
+  }
+}
+
+void restoreSoilProps() {
+  Serial.println("restoreSoilProps");
+  int fc = NVS.getInt("fieldCapacity");
+  int pwp = NVS.getInt("permanentWilt");
+  int sat = NVS.getInt("soilSaturation");
+  if (fc != 0) {
+    fieldCapacity = fc;
+  }
+  if (pwp != 0) {
+    permanentWiltingPoint = pwp;
+  }
+  if (sat != 0) {
+    soilSaturation = sat;
+  }
+  Serial.print("fieldCapacity: ");
+  Serial.println(fieldCapacity);
+  Serial.print("permanentWiltingPoint: ");
+  Serial.println(permanentWiltingPoint);
+  Serial.print("soilSaturation: ");
+  Serial.println(soilSaturation);
+}
+
+void setupStore() {
+  NVS.begin("store");
+  initDeviceID();
+  restoreSoilProps();
+  restoreLightProps();
+  restoreAutoProps();
+}
+
+void setSoilProperties(int FC, int PWP, int SAT) {
+  fieldCapacity = FC;
+  permanentWiltingPoint = PWP;
+  soilSaturation = SAT;
+  persistSoilProps(FC, PWP, SAT);
+  Serial.print("new fieldCapacity: ");
+  Serial.println(fieldCapacity);
+  Serial.print("new permanentWiltingPoint: ");
+  Serial.println(permanentWiltingPoint);
+  Serial.print("new soilSaturation: ");
+  Serial.println(soilSaturation);
+}
+
+// Method to persist save the given lightning properties to NVS
+void persistLightProps(int NM, int minLX) {
+  Serial.println("persistLightProps");
+  bool n = NVS.setInt("nanoMeter", NM);
+  bool m = NVS.setInt("minimumLux", minLX);
+  if (n && m) {
+    Serial.println("Light properties sucessfully stored.");
+    NVS.commit();
+  }
+  else {
+    Serial.println("error occured while trying to persist light properties");
+  }
+}
+
+// Method to restore light properties from Non-Volatile Storage (NVS)
+void restoreLightProps() {
+  Serial.println("restoreLightProps");
+  int nm = NVS.getInt("nanoMeter");
+  int minLX = NVS.getInt("minimumLux");
+  if (nm != 0) {
+    setValueNM(nm);
+  }
+  if (minLX != 0) {
+    minimumLightValueLX = minLX;
+  }
+  Serial.println(minimumLightValueLX);
+}
+
+// Method to set given light properties
+void setLightProperties(int NM, int minLX) {
+  setValueNM(NM);
+  minimumLightValueLX = minLX;
+  persistLightProps(NM, minLX);
+  Serial.print("new minimum Light Value LX: ");
+  Serial.println(minimumLightValueLX);
+}
+
+void persistAutoProps(bool light, bool irrigation) {
+  Serial.println("persistAutoProps");
+  // Saved in NVS as Integer: 1 = true, 2 = false, 0 = not persisted, use standard settings
+  bool n = NVS.setInt("automaticLight", (light ? 1 : 2));
+  bool m = NVS.setInt("automaticIrrigation", (irrigation ? 1 : 2));
+  if (n && m) {
+    NVS.commit();
+    Serial.println("Auto properties sucessfully stored.");
+  } else {
+    Serial.println("error occured while trying to persist auto properties");
+  }
+}
+
+void restoreAutoProps() {
+  Serial.println("restoreLightProps");
+  int li = NVS.getInt("automaticLight");
+  int ir = NVS.getInt("automaticIrrigation");
+  automaticLight = (bool) (li != 2);
+  automaticIrrigation = (bool) (ir != 2);
+  Serial.println(minimumLightValueLX);
+}
+
+void setAutoProperties(bool light, bool irrigation) {
+  automaticLight = light;
+  automaticIrrigation = irrigation;
+  persistAutoProps(light, irrigation);
+  Serial.print("new auto settings: ");
+  Serial.println(automaticLight);
+  Serial.println(automaticIrrigation);
+}
+
+String DEVICE_ID = "";
+
+void initDeviceID() {
+  DEVICE_ID = NVS.getString("UUID");
+  if (!DEVICE_ID.isEmpty()) {
+    Serial.print("Fetched Device ID from NVS: ");
+    Serial.println(DEVICE_ID);
+  } else {
+    uint8_t uuid[16];
+    ESPRandom::uuid(uuid);
+    DEVICE_ID = ESPRandom::uuidToString(uuid);
+    NVS.setString("UUID", DEVICE_ID);
+    NVS.commit();
+    Serial.print("New Device ID: ");
+    Serial.println(DEVICE_ID);
+  }
+}
+
+// Returns the device ID
+String getDeviceID() {
+  return DEVICE_ID;
+}
+
+const char* getDeviceIDcharArr() {
+  return DEVICE_ID.c_str();
+}

src/store.h

@@ -0,0 +1,29 @@
+// Feldkapazität des Bodens in Prozent: Standard ist Humus
+extern int fieldCapacity;
+// PWP des Bodens in Prozent: Standard ist Humus
+extern int permanentWiltingPoint;
+// Boden vollständig gesättigt bei (Prozent): Standard ist Humus
+extern int soilSaturation;
+// Helligkeitswert der mindestens vorhanden sein muss
+extern int minimumLightValueLX;
+// switches for automatic light and irrigation control
+extern bool automaticLight;
+extern bool automaticIrrigation;
+// make sure device irrigates until fieldcapacity is reached
+extern bool irrigateUntilFC;
+// Device UUID will be set on first boot.
+extern String DEVICE_ID;
+
+void persistSoilProps(int FC, int PWP, int SAT);
+void restoreSoilProps();
+void setupStore();
+void setSoilProperties(int FC, int PWP, int SAT);
+void persistLightProps(int NM, int minLX);
+void restoreLightProps();
+void setLightProperties(int NM, int minLX);
+void persistAutoProps(bool light, bool irrigation);
+void restoreAutoProps();
+void setAutoProperties(bool light, bool irrigation);
+void initDeviceID();
+String getDeviceID();
+const char* getDeviceIDcharArr();

src/temperatureSensor.cpp

@@ -1,7 +1,9 @@
-#include <header.h>
+#include <DHT.h>
+#include <DHT_U.h>
+#include <common.h>
+
 
 #define DHTPIN PIN_DHT11
-
 #define DHTTYPE DHT11
 
 

src/temperatureSensor.h

@@ -0,0 +1,3 @@
+void setupTemperatureSensor();
+float readHumidity();
+float readTemperature();

src/valve.cpp

@@ -0,0 +1,66 @@
+#include <capacitiveSoilMoistureSensor.h>
+#include <common.h>
+#include <store.h>
+
+extern "C" {
+  #include "freertos/FreeRTOS.h"
+  #include "freertos/task.h"
+}
+
+#include <valve.h>
+
+bool openValve() {
+  digitalWrite(PIN_VALVE, HIGH);
+  digitalWrite(PIN_LED_G, LOW);
+  digitalWrite(PIN_LED_B, HIGH);
+  return true;
+}
+
+bool closeValve() {
+  digitalWrite(PIN_VALVE, LOW);
+  digitalWrite(PIN_LED_G, HIGH);
+  digitalWrite(PIN_LED_B, LOW);
+  return false;
+}
+
+void valveTask(void *parameter) {
+  bool isAutomatic = (bool)parameter;
+  Serial.print(isAutomatic);
+  Serial.println(" Valve task triggered.");
+  unsigned long valveTimeoutTimer = millis();
+  bool valveOpen = false;
+  int initialSoilMoisture = readCapacitiveSoilMoistureSensor();
+
+  if (initialSoilMoisture <= permanentWiltingPoint || irrigateUntilFC) {
+    valveOpen = openValve();
+    irrigateUntilFC = true;
+  } else {
+    Serial.println("Soil contains enough water. No irrigation needed. ");
+  }
+
+  while (valveOpen) {
+    delay(500);
+    int mstValue = readCapacitiveSoilMoistureSensor();
+
+    if (mstValue > fieldCapacity) {  // && isAutomatic
+      Serial.println("Field capacity reached. No irrigation needed. ");
+      valveOpen = closeValve();
+      irrigateUntilFC = false;
+    }
+    if (millis() - valveTimeoutTimer >= MAX_VALVE_TIMEOUT) {
+      Serial.println("Irrigation timeout reached. close valve. ");
+      valveOpen = closeValve();
+    }
+  }
+  vTaskDelete(NULL);
+}
+
+void toggleValve(bool automatic) {
+  xTaskCreate(
+      valveTask,   /* Task function. */
+      "valveTask", /* String with name of task. */
+      2048,        /* Stack size in bytes. */
+      &automatic,  /* Parameter passed as input of the task */
+      3,           /* Priority of the task. */
+      NULL);       /* Task handle. */
+}

src/valve.h

@@ -0,0 +1 @@
+void toggleValve(bool automatic);