Light will now turn on if lx below minLX also color can be changed based on nanoMeters of prefered light

src/connections.cpp

@@ -109,7 +109,8 @@ Serial.println("receiving light treshold...");
     DeserializationError err = deserializeJson(doc, payload);
     if (err == DeserializationError::Ok) {
       int nm = doc["nm"];
-      setValueNM(nm);
+      int minLX = doc["minLX"];
+      setLightningProperties(nm, minLX);
     } else {
       Serial.println(err.c_str());
     }

src/header.h

@@ -40,11 +40,17 @@
 #define PIN_VALVE 32
 #define MAX_VALVE_TIMEOUT 10000
 
-// LED
+// STATUS LED
 #define PIN_LED_R 2
 #define PIN_LED_G 0
 #define PIN_LED_B 4
 
+// LIGHT LED
+#define LIGHT_LED_PIN_R 27
+#define LIGHT_LED_PIN_G 26
+#define LIGHT_LED_PIN_B 25
+#define MAX_LIGHT_TIMEOUT 10000
+
 // MQTT
 #define MQTT_HOST "mqtt.timovolkmann.de"
 #define MQTT_PORT 1883
@@ -77,12 +83,13 @@ extern void publishMessage(const char *topic, const char *msg);
 
 // RGB PWM LED
 extern void setupPWM();
-extern bool activateLight();
 extern void setValueNM(int NM);
-extern void getColorBasedOnValueNM();
+extern void getColorBasedOnValueNM(int valueNM);
+extern void triggerLight();
 
 // sensors
 void readSensors();
 void toggleValve();
 void setSoilProperties(int FC, int PWP, int SAT);
-void setupStore();
+void setupStore();
+void setLightningProperties(int NM, int minLX);

src/lightChecker.cpp

@@ -1,6 +1,6 @@
 #include <header.h>
 
-int valueNM;
+bool lightActive = false;
 // Colors in Array: purple, blue, green, yellow, orange, red, white
 int colorValueArray[][3] = {{125,0,125}, {0,0,255}, {0,255,0}, {255,255,0}, {255,140,0}, {255,0,0}, {255,255,255}};
 int colorCounter = 6;
@@ -14,9 +14,9 @@ const int resolution =   8;
 
 void setupPWM() {
     // Set pins as output
-    pinMode(PIN_LED_R, OUTPUT);
+    pinMode(LIGHT_LED_PIN_R, OUTPUT);
-    pinMode(PIN_LED_G, OUTPUT);
+    pinMode(LIGHT_LED_PIN_G, OUTPUT);
-    pinMode(PIN_LED_B, OUTPUT);
+    pinMode(LIGHT_LED_PIN_B, OUTPUT);
 
     // Configure LED PWM functionalitites
     ledcSetup(ledChannelRed, freq, resolution);
@@ -24,35 +24,47 @@ void setupPWM() {
     ledcSetup(ledChannelBlue, freq, resolution);
 
     // Attach the channel to the GPIO2 to be controlled
-    ledcAttachPin(PIN_LED_R, ledChannelRed);
+    ledcAttachPin(LIGHT_LED_PIN_R, ledChannelRed);
-    ledcAttachPin(PIN_LED_G, ledChannelGreen);
+    ledcAttachPin(LIGHT_LED_PIN_G, ledChannelGreen);
-    ledcAttachPin(PIN_LED_B, ledChannelBlue);
+    ledcAttachPin(LIGHT_LED_PIN_B, ledChannelBlue);
 }
 
 void setValueNM(int NM) {
-    valueNM = NM;
+    getColorBasedOnValueNM(NM);
-    getColorBasedOnValueNM();
+    // TODO: add persistenz for colorCounter
 }
 
-void getColorBasedOnValueNM() {
+void getColorBasedOnValueNM(int valueNM) {
-    if (valueNM <= 420) {
+    if (valueNM <= 420) {   //Purple
         colorCounter = 0;
     }
-    else if (valueNM <= 490) {
+    else if (valueNM <= 490) {  //Blue
         colorCounter = 1;
     }
-    else if (valueNM <= 575) {
+    else if (valueNM <= 575) {  //Green
         colorCounter = 2;
     }
-    else if (valueNM <= 585) {
+    else if (valueNM <= 585) {  //Yellow
         colorCounter = 3;
     }
-    else if (valueNM <= 650) {
+    else if (valueNM <= 650) {  //Orange
         colorCounter = 4;
     }
     else if (valueNM > 650) {  // 650 to 750 is red
         colorCounter = 5;
     }
+    Serial.println("New color set based on: ");
+    Serial.print(valueNM);
+}
+
+bool shutdownLight() {
+    //digitalWrite(LIGHT_LED_PIN_R, LOW);
+    //digitalWrite(LIGHT_LED_PIN_G, LOW);
+    //digitalWrite(LIGHT_LED_PIN_B, LOW);
+    ledcWrite(ledChannelRed, 0);
+    ledcWrite(ledChannelGreen, 0);
+    ledcWrite(ledChannelBlue, 0);
+    return false;
 }
 
 bool activateLight() {
@@ -60,4 +72,24 @@ bool activateLight() {
     ledcWrite(ledChannelGreen, colorValueArray[colorCounter][1]);
     ledcWrite(ledChannelBlue, colorValueArray[colorCounter][2]);
     return true;
+}
+
+void lightTask(void *parameter) {
+    unsigned long lightTimeoutTimer = millis();
+    if (lightActive == false) {
+        lightActive = activateLight();
+        while (millis() - lightTimeoutTimer <= MAX_LIGHT_TIMEOUT) {
+        }
+        lightActive = shutdownLight();
+    }
+}
+
+void triggerLight() {
+  xTaskCreate(
+      lightTask,   /* Task function. */
+      "lightTask", /* String with name of task. */
+      2048,        /* Stack size in bytes. */
+      NULL,        /* Parameter passed as input of the task */
+      1,           /* Priority of the task. */
+      NULL);       /* Task handle. */
 }

src/peripherals.cpp

@@ -19,6 +19,8 @@ int fieldCapacity = 44;
 int permanentWiltingPoint = 25;
 // Boden vollständig gesättigt bei (Prozent): Standard ist Humus
 int soilSaturation = 69;
+// Helligkeitswert der mindestens vorhanden sein muss
+int minimumLightValueLX = 50;
 
 void readSensors() {
   StaticJsonDocument<128> doc;
@@ -27,6 +29,9 @@ void readSensors() {
   Serial.print(lxValue);
   Serial.println(" lx");
   doc["brightness"] = lxValue;
+  if(lxValue < minimumLightValueLX) {
+    triggerLight();
+  }
   //sprintf(buffer, "%f", lxValue);
   //publishMessage(MQTT_BRIGHTNESS, buffer);
 
@@ -148,3 +153,11 @@ void setSoilProperties(int FC, int PWP, int SAT) {
   Serial.println(soilSaturation);
 }
 
+void setLightningProperties(int NM, int minLX) {
+  setValueNM(NM);
+  minimumLightValueLX = minLX;
+  Serial.print("new minimum Light Value LX: ");
+  Serial.println(minimumLightValueLX);
+  // TODO: add Persistenz for minLX
+}
+